Cable harnesses, cable assemblies, pre-wired heavy duty connector sets, motor and drive cables, data cables and sensor cordsets — built to your drawing, tested before shipment, from one piece upward.
There is no shortage of companies selling cable by the metre. What is hard to find — especially in small quantities — is someone who will read your drawing, crimp the right contacts onto the right conductors, fit the glands, test it, label it, and put it in a box that survives the flight.
The crimping and assembly are done in a partner harness workshop we have used for years, working to our drawings and released through our own inspection — the engineering review, the approved sample and the test record are all ours. We work from schematics, pinout tables, connector part lists, a physical sample, or even a hand sketch with dimensions marked. If something in your drawing is ambiguous, we ask before the harness is cut, not after.
Every category is made to drawing or sample. Click any card for the enquiry form — or email your drawing directly.
These are the ranges we handle routinely. If your requirement sits outside one of them, ask anyway — the answer is often yes with a different construction.
| Conductor cross-section | 0.14 – 95 mm² (AWG 26 – 3/0) |
|---|---|
| Working voltage | up to 1000 V |
| Connectors | Heavy duty (H3A – H24B), M8/M12, D-sub, RJ45, circular, terminal blocks, bare ends |
| Shielding | Foil + drain, tinned copper braid ≥85% coverage, individual pair shield |
| Jacket materials | PVC, PUR, PE, silicone, silicone-free halogen-free options |
| Testing | 100% continuity, 1500 V hipot, pull test on crimps, dimensional check on request |
| Marking | Heat-shrink labels, printed sleeves, cable markers, custom wire colour code |
| Batch range | 1 pc prototype to 10,000 pcs per year per part number |
| Sample lead time | 3–7 working days depending on category |
| Documentation | Commercial invoice, packing list, RoHS/CE declaration, test report |
Send it and we will come back with a priced quotation, lead time and any engineering questions within 24 hours.