CNC turning and milling, sheet metal and brackets, transmission parts, structural components and hydraulic fittings — machined to your drawing, or reverse-engineered from the worn part you are holding.
Large machine shops are built around volume. Send them a one-piece repair part and you either get ignored or get a price that makes the part not worth fixing. That is the gap we work in: one piece, quoted properly, delivered on time.
Upload a STEP or IGES file and our engineer reviews manufacturability — wall thickness, tool access, tolerance stack-ups — and tells you if something will be difficult or expensive before you commit. If we can make it cheaper with a small design change, we will say so.
Every category is made to drawing or reverse-engineered from a sample. Click any card to start an enquiry.
Routine ranges are listed below. Tight-tolerance or unusual geometry is quoted case by case — ask, and you will get a straight answer on feasibility rather than a guess.
| Turning capacity | Ø 2 – 300 mm, up to 1000 mm between centres |
|---|---|
| Milling capacity | 3-axis / 4-axis, up to 800 × 500 × 300 mm |
| General tolerance | ISO 2768-m; ±0.01 mm achievable on request |
| Surface roughness | Ra 3.2 standard, Ra 0.8 on request |
| Metals | Aluminium 6061 / 7075, carbon steel, stainless 304 / 316 / 17-4PH, brass, bronze, cast iron |
| Plastics | POM, PEEK, PTFE, PA / nylon, ABS, acrylic, phenolic |
| Surface treatment | Anodising, zinc plating, black oxide, passivation, powder coating (RAL), galvanising, painting |
| Heat treatment | Hardening, tempering, nitriding, case hardening |
| Secondary operations | Threading, keyway, broaching, knurling, engraving, PEM inserts |
| Inspection | Vernier / micrometre / height gauge; CMM report available for critical dimensions |
| Documentation | Material cert, dimensional report, first article inspection, Conformity certificate |
None of these are tricks. They are the real cost drivers, and telling us upfront saves money and a week of email.
You will get manufacturability feedback, a price, and a lead time — within 24 hours on working days.